Kinex 500 mm stainless steel straight edge Kinex 4034-07-015 The Narex factory was founded

The Narex factory was founded in 1919 by Václav Richter

so designed to cut when pulling with the right hand or pushing with the left hand

3 (smooth) cut which gives a medium finish for rasps

It simplifies the process of making an accurately sized tenon to fit an existing mortise

Another great advantage of the glass backing is that the grit and micron rating is marked on the underside of the glass and is visible through the glass side of the stone which makes for very easy identification

Kinex 500 mm stainless steel straight edge Kinex 4034-07-015 The Narex factory was foundedThis 500 mm long (19. 69") x 40 mm wide x 8 mm deep straight edge is made from stainless steel that is carefully stress relieved before grinding and lapping to ensure that it is dimensionally stable over time and with changing ambient temperature. This straight edge is made to an accuracy level of 1 as per the DIN 874 standard, which translates to a flatness of better than 12 m (or 0. 012 mm 0. 000472") along it's entire length. These straight edges