6mm Carbide Endmill 55 HRC 4 Flutes Total Length Is 50/75/100/150 MM bt40fma27250l you can use any ISO

you can use any ISO inserts of RPMT1204/RDKW1204

ER25 Collets range from 1 mm to 16 mm Thread inside the internal stop screwMade from alloy steel hardened to 54 – 56rcBalanced to G6

Holds all ER11 collets from 1 mm to 7 mmMade from alloy steel hardened to 54 – 56rcPrecision ground ID thread and taperHEX type has an ID thread of – M14X0

you can use APMT1135 Of Tabikut Brand Insert into this If any other brand has same insert it can also be fixed to this

BT40 Morse taper is used primarily to hold Tang Type Drills and Arbours

6mm Carbide Endmill 55 HRC 4 Flutes Total Length Is 50/75/100/150 MM bt40fma27250l you can use any ISO6mm Carbide Endmill 55 HRC 4 Flutes Total Length Is 50 75 100 150 MM Solid Carbide cutters are used to machine Hard Materials, Steel, Alloy Steel, Cast Iron, Stainless Steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance. 35 Degree Helix Angle, Grain Size 0. 05 umUsed for Face Mill, Shoulder mill, side mill, etc, Plastic Packaging for non breakable packing