Maestrini Brass Water Intake Scoop (Oval / 2" BSP) ns kerosene and compressed air

kerosene and compressed air

If more height is required use a spacer under the mounting casting

Water pump seal for Bukh DV10 and DV20

- Stage Three: Filtration: Proprietary Aquabloc II cartridge elements repel water and remove contaminants from fuel down to 30 micron (nominal)

the surfaces must be clean and free from residues

Maestrini Brass Water Intake Scoop (Oval / 2" BSP) ns kerosene and compressed airDescription Maestrini scoop strainer made from brass, with an oval shaped grating. This scoop is designed for raw water intake systems, such as those used for engine coolant. It fits through the hull with the grating on the outside and the male threaded pipe leading inside, usually to a valve to open and close the intake. The scoop grating can be secured to the hull using a marine sealant and is also fixed with a back locking nut and washer. Important