Chipbreaker Down Cut Spiral Beading 2-1/8" cutting length

2-1/8" cutting length

FOR THE SET: Order Whiteside #6005 for both the Stile and Rail Cutters

up cut spiral with 3/4" cutting diameter

screw type helix mortise bit with 23/32" cutting diameter

A shallow cut will leave a thin groove with a sight radius while a deeper cut will provide a full radius

Chipbreaker Down Cut Spiral Beading 2-1/8" cutting lengthMaterials: Natural woods, composites Recommended RPM: 16,000 18,000 (max 24,000) Each flute has small serrations to tear up the chips as the bit is cutting through the project. This bit has a feed rate in between that of a roughing bit and a standard spiral router bit. The down cut spiral design provides the best top surface edges, ejecting chips away from the router when routing through material. This design also decreases the tendency to lift thin