1' Mandrel Bent Aluminum 180° Bend, 3.0" g57-1950 MOM-MCL32AL3B

MOM-MCL32AL3B

The edge of the PTFE line should protrude approximately 1/8″ from the middle part of the fitting

INCLUDED-Main Rotating Assembly-Mounting Bracket with Hardware-5mm Barbed Vacuum Fitting-Vacuum Plug Fitting (Returnless)-1/4" Push-To-Connect Vacuum Fitting-3AN Male Vacuum Fitting-6AN ORB plug (x2)-8AN ORB plug (x1)-6AN ORB to 6AN male adapter (x3)-8AN ORB to 8AN male adapter (x1)

The calibration for standard or metric display is easily performed using the buttons on the face of the gauge

GARRETT PART NUMBER:

1' Mandrel Bent Aluminum 180° Bend, 3.0" g57-1950 MOM-MCL32AL3BProduct Description: Use this pre bent section of aluminum pipe for any project. Works extremely well for intercooler pipe fabrication or intake pipe fabrication. Aluminum is very lightweight while being resistant to rust. The smooth mandrel bends create optimal airflow and ease of welding. This aluminum pipe is 6061 T grade. 6 series alloys have relatively good formability, weldability, machinability, and corrosion resistance. This aluminum pipe is