PlatSil® 71/73 Part R Retarder Size:Gallon Step pouring in layers may

Step pouring in layers may resolve this problem

Heating Elastack requires no special equipment

Unpainted castings will darken after being exposed to UV light

You can also scatter a little Paverpol on the wet layer and rub it afterwards

it is fun to use

PlatSil® 71/73 Part R Retarder Size:Gallon Step pouring in layers mayPlatSil 71 73 Part R Retarder slows the cure of PlatSil products. Adding ~1% of Part R to the total mixed weight roughly doubles the pour time. Adding ~2% of Part R triples the pour time. Experiment to determine the amount that is best suited for your application. Do not exceed 4% as the system may not cure at all. NOTES: Add Part R to Part A prior to mixing with Part B. For additional information, read the Technical Bulletin associated with your