Chipbreaker Up Cut Spiral Groove straight bit with 3/16" cutting

straight bit with 3/16" cutting diameter

2" overall length

and inlays with a handheld router

TOOL SPECS: Carbide-tipped traditional roundover & edge trim bit with 1/4" radius

Assemble with slot cutter and bearing on arbor

Chipbreaker Up Cut Spiral Groove straight bit with 3/16" cuttingMaterials: Natural woods, composites Recommended RPM: 16,000 18,000 (max 24,000) Each flute has small serrations to tear up the chips as the bit is cutting through the project. This bit has a feed rate in between that of a roughing bit and a standard spiral router bit. Up cut spiral design provides the best control with hand or table routing pulling the chips up and away from the work material. TOOL SPECS: Solid carbide, up cut, chipbreaker spiral